Brocade Communications Systems 6910 Manual Download Page 19

Page: 19 / 80

Brocade 6910 Ethernet Access Switch MIB Reference

53-1002582-01

RFC 1213: Management Information Base (MIB-II)

The following objects from RFC1213 are supported on Brocade 6910 switches.

The following groups from RFC 1213 are not supported on Brocade 6910 switches.

•

interfaces – Replaced by IF-MIB.interfaces

•

at – atTable has been deprecated

•

ip – Replaced by IP-MIB.ip

•

icmp – Replaced by IP-MIB.icmp

•

tcp – Replaced by IP-MIB.icmp

•

udp – Replaced by UDP-MIB.udp

•

egp

•

transmission – Supports other relevant MIBs which are registered under this node, such as
EtherLike MIB and Entity MIB

RFC 1493: Definitions of managed objects for bridges

The following groups are supported on Brocade 6910 switches.

The following object groups in RFC 1493 are not supported on Brocade 6910 switches.

•

dot1dSr

RFC 1611: DNS Server MIB extensions

The following groups are supported on Brocade 6910 switches.

Object Group Name

Object Identifier

system

1.3.6.1.2.1.1

snmp

1.3.6.1.2.1.11

Object Group Name

Object Identifier

dot1dBridge

1.3.6.1.2.1.17

dot1dBase

1.3.6.1.2.1.17.1

dot1dStp

1.3.6.1.2.1.17.2

dot1dTp

1.3.6.1.2.1.17.4

dot1dStatic

1.3.6.1.2.1.17.5

Object Group Name

Object Identifier

dnsServMIBObjects

1.3.6.1.2.1.32.1.1

dnsServConfig

1.3.6.1.2.1.32.1.1.1

dnsServCounter

1.3.6.1.2.1.32.1.1.2

Summary of Contents for 6910

















































































Search results

Summary of Contents for 6910

Reviews:

Related manuals for 6910

Brands by name

Popular brands

Brocade Communications Systems 6910, Manual

Search results

Summary of Contents for 6910

Reviews:

Related manuals for 6910

Brands by name

Popular brands