Brocade Communications Systems 6910, Manual

Page: 71 / 80

Brocade 6910 Ethernet Access Switch MIB Reference 59
53-1002582-01
Standard traps
Brocade supports the following traps from RFC 2863:
Traps for spanning tree protocol
Brocade supports for the following traps for Spanning Tree Protocol from RFC 1493.
Traps for RMON events
Brocade supports for the following traps for RMON from RFC 2819.
Trap Name and Number Varbind Description
linkDown
1.3.6.1.6.3.1.1.5.3 ifIndex(1)
ifAdminStatus(7)
ifOperStatus(8) A failure in one of the communication links.
For example,
Interface <port-name> <port-num>, state down
linkUp
1.3.6.1.6.3.1.1.5.4 ifIndex(1)
ifAdminStatus(7)
ifOperStatus(8) The communication link is up.
For example,
Interface <port-name> <port-num>, state up
Trap Name and Number Description
newRoot
1.3.6.1.2.1.17.0.1 Indicates that the sending agent has become the new root of the Spanning
Tree. The trap is sent by a bridge soon after its election as the new root, for
example, upon expiration of the Topology Change Timer immediately
subsequent to its election.
topologyChange
1.3.6.1.2.1.17.0.2 Is sent by a bridge when any of its configured ports transitions from the
Learning state to the Forwarding state, or from the Forwarding state to the
Blocking state. The trap is not sent if a newRoot trap is sent for the same
transition.
Trap Name and Number Varbind Description
risingAlarm
1.3.6.1.2.1.16.0.1 alarmIndex,
alarmVariable,
alarmSampleType,
alarmValue,
alarmRisingThreshold The SNMP trap that is generated when an alarm entry
crosses its rising threshold and generates an event that is
configured for sending SNMP traps.
fallingAlarm
1.3.6.1.2.1.16.0.2 alarmIndex,
alarmVariable,
alarmSampleType,
alarmValue,
alarmFallingThreshold The SNMP trap that is generated when an alarm entry
crosses its falling threshold and generates an event that is
configured for sending SNMP traps.