Brobo Group
3.1.3. Saw Handle (with ‘Dead Man’ Trigger Switch)
Although comes as a standard, the saw handle can be installed with a Dead Man’ type trigger switch enabled instant
switching at the operators control. This particular configuration allows for increased efficiency and safety.
3.1.4. Main Power Standby & Speed Selector Switch
The rotary Main power switch also serves as the speed selector
switch. When the speed is selected the saw is set to “STANDBY”
mode. The “STANDBY” lamp illuminates to provide a warning to
personnel the saw is at the ready. AT any time the “Dead Man”
trigger is activated the saw will run.
3.1.5. Manual Vice Clamp
The manual vice clamp lever allows speedy clamping of
material with ergonomically designed clamp lock.
Figure 8.
Standby Lamp
Figure 9.
Manual Vice Clamp
Figure 7.
Saw Handle with “Dead Man” Trigger Switch
