Brobo Group
To connect the machine to the power supply, proceed as follows:
1) Insert the power plug into the socket, while ensuring that the
mains voltage is compatible
for which the
saw unit is operating at.
2) Switch the saw on by rotating the control switch located on the saw head assembly as shown in
Figure 4
below.
Figure 4.
Main Control Switch
3) Check that the motor is operating in the correct direction, that is the blade is rotating downwards and into
the direction of the vice clamps.
4) Ensure that all electrical leads and cables (including supply leads) are maintained in a good condition and
away from sharp objects. All leads should be replaced if cut, sliced or damaged in any way.
Brobo Group
S315/S350/S400 Series Metal Cutting Saw is now ready for use.
Chapter 3 provides a detailed description of the various features of the saw and its operating cycles
