Brobo OMRM 125 PRO, Operating Manual

Page: 40 / 69

39
8
MAINTENANCE
8.8 Belt Setting
Take necessary occupational safety measures before replacing the belt. The main switch and the air
inlet of the machine must be DEFINITELY closed!
Belts running as connected to the motor in machines may loosen or be deformed over time. For this reason,
the tension of the belts should be checked every six months and adjusted to the appropriate tension setting
if necessary. Deformed belts should be replaced with new ones. This section provides information about
maintenance operations for the belts in the machine.
1–) The main switch of the machine is turned off and
air inlet is discontinued prior of all maintenance
procedures.
2–) In order to access the belt, the belt housing is
taken out by removing its allen keys.
3–) The bolts that are tied to the motor mounting
bracket are removed with 13-wrench as is seen in
the picture on the side.
Belt
Belt Housing
Motor Moun�ng Bracket
Belt
13 Wrench