9
Section B – Cabinet
Slide Rails (Cabinet)
REMOvE AND RE-INSTALL
The compactor’s slide rails may become bent from mis-
use or the ball bearings may become worn.
RAIL
SPRING CLIPS
SCREW
NUT
SCREWS
Remove trash bucket assembly. (See Trash Bucket,
1.
Remove.)
Remove two Phillips head screws from the front and
2.
rear of the left track slide rail. NOTE: It is necessary to
slide the inner rail to access both screws.
Remove the slide rail from the cabinet.
3.
To re-install, place slide rail onto the three “spring
4.
clips” inside of the cabinet. Align holes in rail with
bracketed holes on inside of cabinet and secure with
two Phillips head screws. Repeat for other side.
Slide Rails (Bucket)
REMOvE AND RE-INSTALL
RAIL
BUCKET
SCREW
SCREWS
Remove four Phillips head screws that secure the left
1.
slide rail to the bucket. Remove the rail.
Repeat Step 1 for the right slide rail.
2.
Installation is the reverse of removal.
3.
