BroaMan MUX22
Operating Manual
Rev. 2.1
14
MUX22 IVT/MADI-OPT; IVT/MADI-BNC
Word Clock LED:
Indicates the selected Sync/Word Clock source:
INT:
Internal Sync/Word Clock of the device
BNC:
External via the BNC SYNC input
NET:
Sync/Word Clock received from the Optocore network
Signal Monitor LED for 4 Duplex MADI:
BNC:
Four Dual Coaxial MADI
FO:
Four Bi-Directional Optical SC MADI
CAT:
Future option
POE:
Future option
ERROR:
Red: Error with incoming MADI signal
LAN:
Yellow: Ethernet communication present
MADI:
Green: MADI Signal present
POWER:
Red: Future Option
Signal Monitor LED for 8 3G/HD/SDI Channels:
IVT:
Intelligent Video Tunnel
MR:
currently not used
R33:
currently not used
VSP:
currently not used
PEAK:
Red: Optical power exceeds the maximum input level of the receiver
LEVEL:
Yellow: Optical power is in proper range and good condition
SIGNAL:
Indicates SDI input/output signal presence
MUTE:
Red: Optical power is too low, signal is muted
LINK LED:
SL1:
Communication is established via SANE 1 (rear panel)
SL2:
Communication is established via SANE 2 (rear panel)
OL1:
Communication is established via Optocore LINK 1 (rear panel)
OL2:
Communication is established via Optocore LINK 2 (rear panel)
Master LED:
Indicates the master device in the system
OPTO LED:
Optocore communication is established
SANE LED:
SANE communication is established
Device ID Display:
The identification number (ID) of the device
HEALTH LED:
Green: Power supply to the device is working; temperature is within limits
PWR 1 LED:
Green: Power supply 1 is receiving power and working
PWR 2 LED:
Green: Power supply 2 is receiving power and working
