BroaMan MUX22
Operating Manual
Rev. 2.1
12
Front Panel
MUX22 IVT/IC444; IVT/IC422; IVT/IC485; IVT/ICAES
Word Clock LED:
Indicates the selected Sync/Word Clock source:
INT:
Internal Sync/Word Clock of the device
BNC:
External via the BNC SYNC input
NET:
Sync/Word Clock received from the Optocore network
Signal Monitor LED for 4 Duplex Audio Channels:
IC422:
Four-wire intercom ports with bi-directional RS422 (for Clear-Com)
IC485:
Four-wire intercom ports with bi-directional RS485 (for RTS)
IC444:
Line Level I/O with GPIO
ICAES:
Bi-directional AES3 ports
PEAK:
Red: Clipping. Input level exceeds the maximum input level of 0dBFS
LEVEL:
Yellow: Warning level. Input level exceeds -10dBFS
SIGNAL:
Green: Signal present
≥
-60dBFS. Brightness controlled
MUTE:
Red: Input: no function; Output: no signal routed to this output
Signal Monitor LED for 8 3G/HD/SDI Channels:
IVT:
Intelligent Video Tunnel
MR:
currently not used
R33:
currently not used
VSP:
currently not used
PEAK:
Red: Optical power exceeds the maximum input level of the receiver
LEVEL:
Yellow: Optical power is in proper range and good condition
SIGNAL:
Green: Indicates SDI input/output signal presence
MUTE:
Red: Optical power is too low, signal is muted
AUDIO LINK LED:
SL1:
Communication is established via SANE 1 (rear panel)
SL2:
Communication is established via SANE 2 (rear panel)
OL1:
Communication is established via Optocore LINK 1 (rear panel)
OL2:
Communication is established via Optocore LINK 2 (rear panel)
Master LED:
Indicates the master device in the system
OPTO LED:
Optocore communication is established
SANE LED:
SANE communication is established
Device ID Display:
The identification number (ID) of the device
