LinkMAX
HSA300 User Manual
83
2. Select an interface name from the VCC Interface drop-down
list.
3. Enter the VPI and VCI values assigned by your ISP, and
select the mux type from the drop-down list.
4. Click
.
5. On the confirmation page, click
to return to the
ATM VCC Configuration page.
6. Click the Admin tab, and then click
Commit & Reboot
in the
task bar.
7. Click
to save your changes to permanent
memory.
The new interface should now display in the ATM VCC
Configuration table.
You may need to create a new WAN interface, or modify an existing
interface, so that it uses the new VCC. See the instructions for
configuring a PPP (Chapter 12), EoA (Chapter 14), or IPoA
(Chapter 15) interfaces, depending on the type you use to
communicate with your ISP.
You can verify that the new settings work by attempting to access
the Internet from a LAN/USB computer. Contact your ISP for
troubleshooting assistance.