LinkMAX
HSA300 User Manual
23
Part 2. Configuring IP properties on the USB PC.
Now that the
USB driver installation is complete, you must configure the USB PC
so that its IP properties place it on the same subnet as HSA300’s
USB port. There are two ways to do this:
!
HSA300 is configured to assign an appropriate IP address
to the USB PC. If you want to use this automatic
assignment feature, called “DHCP server,” you must
configure the USB PC to accept dynamically assigned IP
information.
!
If you want to assign a static IP address to the PC, follow
the instructions on page 19 and use the following
information.
•
In the Network and Dial-up Connections window, be
sure to select the icon that corresponds to your new
USB connection (not the one that corresponds to your
Ethernet NIC). When you display the properties for the
icon, the following text should display in the Connect
Using text box:
GlobeSpan USB IAD LAN Modem #n
•
The USB port on HSA300 is preconfigured with these
properties (you cannot change these values):
USB port IP address:
192.168.0.2
USB port subnet mask:
255.255.255.0
Therefore, your PC must be configured as follows:
IP address:
192.168.0.n where n is a
number from 3 to 254.
Subnet mask:
255.255.255.0
Default gateway:
192.168.0.2
