LinkMAX
HSA300 User Manual
112
Field
Description
Black List Status
Specifies whether or not a violation of this
rule will result in the offending computer's IP
address being added to the Black List, which
blocks the ADSL/Ethernet router from
forwarding packets from that source for a
specified period of time. See Chapter 1
Error! Not a valid result for table.
for
instructions.
Log Tag
A description of up to 16 characters to be
recorded in the log in the event that a packet
violates this rule. Be sure to set the Log
Option to
Enable
if you configure a Log Tag.
Start/End Time
The time range during which this rule is to be
in effect, specified in military units.
Src IP Address
IP address criteria for the source computer(s)
from which the packet originates. In the drop-
down list, you can configure the rule to be
invoked on packets containing:
any
: any source IP address.
lt
:
any
source IP address that is numerically
less than
the specified address.
lteq
: any source IP address that is
numerically
less than or equal to
the specified
address.
gt
: any source IP address that is numerically
greater than
the specified address.
eq
: any source IP address that is numerically
equal to
the specified address.
neq
: any source IP address that is
not equal
to
the specified address.
range
: any source IP address that is within
the specified range, inclusive.
out of range
: any source IP address that is
outside the specified range.
self
: the IP address of the ADSL/Ethernet
router interface on which this rule takes
effect.
Dest IP Address
IP address rule criteria for the destination
computer(s) (i.e., the IP address of the
computer to which the packet is being sent).
In addition to the options described for the
Src IP Address field, the following option is
available:
bcast
: Specifies that the rule will be invoked
for any packets sent to the broadcast
address for the receiving interface. (The
broadcast address is used to send packets to
all hosts on the LAN or subnet connected to
the specified interface.) When you select this
option, you do not need to specify the
address, so the address fields are dimmed.
