manualshive.com logo in svg

Broadcom G610, Hardware Installation Manual

Share
Download
Broadcom G610 Hardware Installation Manual Download Page 50

53-1004408-11 Installation Guide

 

Brocade

®

 G610 Switch Hardware Installation Guide

Figure 21: Closeup of Installing a 32G SFP+ Transceiver into an Upper Port

1. Pull Tab

2. Transceiver

2. Position a cable so that the key (the ridge on one side of the cable connector) is aligned with the slot in the transceiver.

Insert the cable into the transceiver until the latching mechanism clicks.

NOTE

Cables are keyed so that they can be inserted in only one way. If a cable does not slide in easily, ensure that

it is correctly oriented. Do not insert any unsupported cable intended for an other type of transceiver into a

regular SFP+ transceiver. You may damage the cable as well as the transceiver.

Replacing an SFP+ Transceiver

Complete the following steps to remove an SFP+ transceiver and then install a new SFP+ transceiver.

NOTE

SFP+ transceivers are hot-swappable.

 

53-1004408-11

50

Broadcom

Summary of Contents for G610











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands