Broadcom G610 Hardware Installation Manual Download Page 24 | Manualshive

Page: 24 / 74

background image

53-1004408-11 Installation Guide

Brocade

®

G610 Switch Hardware Installation Guide

Attaching the Rear Brackets to the Device

Complete the following steps to attach the rear brackets to the device.
1. Align the right rear bracket to the right rear of the device and use two 8-32 x 5/16-in. screws to attach the bracket to

the device as shown in the following figure.

2. Align the left rear bracket to the left rear of the device and use two 8-32 x 5/16-in. screws to attach the bracket to the

device as shown in the following figure.

3. Tighten all the screws to a torque of 9 in.-lbs (10 cm-kgs).

Figure 7: Attaching the Rear Brackets to the Device

1. Screw, 8-32 x 5/16-in. Panhead Phillips

Installing the 1U and 2U Fixed-Mount Rack Kit for Four-Post Racks

(XBR-R000162)

Use the following instructions to install a fixed-port device in a fixed-mount configuration using the 1U and 2U Fixed-Mount

Rack Kit for Four-Post Racks (XBR-R000162). Observe the following when mounting this device:

•

Two people are required to install the device in a rack. One person holds the device, while the other secures the device

to the rack.

•

Use Electronic Industries Association (EIA) standard racks.

•

Before mounting your device, review any specific installation and facility requirements in the hardware installation

guide for the device.

•

Hardware devices illustrated in these procedures are only for reference and may not depict the device you are

installing into the rack.

Time and Items Required

Allow 15 to 30 minutes to complete the installation procedure.
The following items are required to install a device using the 1U and 2U Fixed-Mount Rack Kit for Four-Post Racks (XBR-

R000162).

53-1004408-11

24

Broadcom

«
...
22
23
24
25
26
...
»

Summary of Contents for G610











































































Reviews:

No comments

Related manuals for G610

Brand: KELCO Pages: 22

Brand: B&K Pages: 28

Brand: B&K Pages: 2

RackSwitch G8264T

Brand: IBM Pages: 20

Brand: Yeastar Technology Pages: 11

Brand: Quintum Pages: 2

Brand: Tripp Lite Pages: 80

Brand: Gefen Pages: 31

Brand: ORiNG Pages: 2

TIMEGUARD WF10COM

Brand: Theben Pages: 35

Brand: Unipoe Pages: 41

Brand: Manhattan Pages: 2

Brand: Orei Pages: 27

Brand: Thinklogical Pages: 17

Brand: EtherWAN Pages: 239

Brand: Tripp Lite Pages: 3

IDS-105FE Series

Brand: Perle Pages: 2

Brand: IPGARD Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands