Broadcom Emulex LPe12000 Series, Installation Manual

Page: 17 / 50

Broadcom LPeHBAs-IG126-100
17
Emulex Host Bus Adapters Installation Guide
To attach media to the HBA, follow these steps:
1. Ensure that the cages have optical transceivers installed in them. If necessary, insert an optical transceiver into each
cage.
The following table provides a list of approved optics.
OM2 – Multimode 50/125 micrometer fiber
(500 MHz × km bandwidth cable) 2.125Gb/s: 0.5m to 300m
4.25Gb/s: 0.5m to 150m
8.5Gb/s 0.5m to 50m 0.5 meters LC
OM1 – Multimode 62.5/125 micrometer fiber
(200 MHz × km bandwidth cable) 2.125Gb/s: 0.5m to 150m
4.25Gb/s: 0.5m to 70m
8.5Gb/s 0.5m to 21m 0.5 meters LC
Table 13: Approved Optics
HBA Model Number Description
Quantity
in Pack Interface Comments
LPe35000-series
LPe32000-series
LPe31000-series LP32-LW-OPT-1 32GFC optic (long-wave laser) 1 SFP+ For LPe35000-series, and
LPe32000-series HBAs,
can be used as an onsite
spare.
Allows upgrade from
LPe31000-series to
LPe32000-series.
LPe35000-series
LPe32000-series
LPe31000-series LP32-LW-OPT-2 32GFC optic (long-wave laser) 2 SFP+ For LPe35000-series, and
LPe32000-series HBAs,
can be used as an onsite
spare.
Allows upgrade from
LPe31000-series to
LPe32000-series.
LPe32000-series
LPe31000-series LP32-SW-OPT-1 32GFC optic (short-wave laser) 1 SFP+ For LPe32000-series
HBAs, can be used as an
onsite spare.
Allows upgrade from
LPe31000-series to
LPe32000-series.
LPe32000-series
LPe31000-series LP32-SW-OPT-2 32GFC optic (short-wave laser) 2 SFP+ For LPe32000-series
HBAs, can be used as an
onsite spare.
NOTE: Allows upgrade
from LPe31000-series to
LPe32000-series.
LPe16000-series LPe16100-OPT 16GFC optic (short-wave laser) 1 SFP+ For LPe16000-series
HBAs, can be used as an
onsite spare.
NOTE: LPe15004 HBAs
do not support replaceable
optics.
Table 12: Media Specifications (LPe1250 HBAs) (Continued)
Fiber-Optic Cable Maximum Length Minimum Length Connector