Broadcom Emulex LPe12000 Series, Installation Manual, Page: 28 / 50

Broadcom LPeHBAs-IG126-100
28
Emulex Host Bus Adapters Installation Guide
Power requirements LPe12004 HBAs:

4.1 watts (typical) at +3.3V ± 9%

4.7 watts (maximum) at +3.3V ± 9%

15.3 watts (typical) at +12V ± 8%

18.7 watts (maximum) at +12V ± 8%

19.5 watts (typical) total

23.5 watts (maximum) total
LPe12002 HBAs:

1.7 watts (typical) at +3.3V ± 9%

2.0 watts (maximum) at +3.3V ± 9%

7.1 watts (typical) at +12V ± 8%

11.3 watts (maximum) at +12V ± 8%

8.8 watts (typical) total

13.3 watts (maximum) total
LPe12000 HBAs:

1.1 watts (typical) at +3.3V ± 9%

1.3 watts (maximum) at +3.3V ± 9%

5.8 watts (typical) at +12V ± 8%

8.8 watts (maximum) at +12V ± 8%

6.9 watts (typical) total

10.1 watts (maximum) total
NOTE: Because of differences in the SFP+ transceivers (short-wave vs. long-wave), the power is slightly
higher (by 100 mW) on the +3.3V power for the long-wave product.
LPe1250 HBAs:

1.1 watts (typical) at +3.3V ± 9%

1.3 watts (maximum) at +3.3V ± 9%

4.8 watts (typical) at +12V ± 8%

8.3 watts (maximum) at +12V ± 8%

5.9 watts (typical) total

9.6 watts (maximum) total
Airflow 150 linear feet per minute (minimum)
Temperature 0°C to 55°C (operating)
–40°C to 70°C (storage)
Humidity 5% to 95% noncondensing
Table 19: LPe12000-Series HBAs and LPe1250 HBA Specifications (Continued)
Parameter Range