e-mail:
voice:
360.854.9559
fax:
866.783.1742
32
WVRC-4 Plus Installation and Operation Manual
SET UP
“Scheduler” Setup Page – Actions – Cont
Enable/Disable Alarms: Alarms for every device that the WVRC-4 Plus monitors
can be enabled and disabled by the scheduler. Select the appropriate "Enable Alarm"
or "Disable Alarm" from the "Event" drop down box on the Scheduler Setup Page
to configure this item. Then from the "Device" drop down box select from the 8
monitored device types and its device number.
Pulse/Toggle: Relays can be pulsed or toggled from the scheduler as well. Select
"Pulse" or "Toggle" from the "Event" drop down box on the Scheduler Setup Page
to configure this item. Then from the "Device" drop down box select the relay you
wish to control. The Pulse duration is configured on the "Relay Setup Page" under
"I/O Setup".
Adjust Time: To assist with daylight savings adjustment, the WVRC-4 Plus can add
or subtract 1 hour from the time-zone offset. Time-zone offset is initially configured
under "Email/Network Setup" and this adjustment will change that value at the
scheduled time. Select "Adjust Time" from the "Event" drop down box then from
the "Device" drop down box select either "-1 Hr" or "+1 Hr" to decrement or incre-
ment the time-zone offset.
