e-mail:
voice:
360.854.9559
fax:
866.783.1742
26
WVRC-4 Plus Installation and Operation Manual
SET UP
“I/O” Setup Page - Power Failure
Label:
Used to identify the input.
Alarms Enter:
This option enables an alarm if voltage is no longer present
on the PF input.
Alarms Exit:
This option enables an alarm when voltage returns to the PF
input.
Email Addresses:
This allows you to assign up to 8 email addresses to receive
power failure emails.
Log Device:
This enables the email snapshot logging of this input.
Delay Time:
This option specifies the wait time from when power failure
is detected before an alarm is activated. The delay is entered
in seconds (0 to 999).
Alarm LED:
Sets the color of the “LED” visual indicator on the
Monitor/Control page when in an alarm condition.
NOTE:
After any item has been changed, you MUST press the “Save Settings” but-
ton for your changes to be saved.
