e-mail:
voice:
360.854.9559
fax:
866.783.1742
30
WVRC-4 Plus Installation and Operation Manual
SET UP
“I/O” Setup Page - Dial Settings - Cont
Monitor Code:
This dial-up access code allows users to monitor or poll the devices
inputs. No control functions can be performed unless a valid
Security access code has been entered. The default code is 456.
Lap:
Specifies the number of times the WVRC-4 Plus will go through
all of the numbers in the dial list when calling out an alarm if it
does not receive an acknowledgement.
NOTE:
Alarms are acknowledged by pushing the star (*) key when an alarm is
called out.
Ring:
Specifies the number of rings required before the WVRC-4 Plus
answers an incoming call.
Repeat:
Specifies the number of times the voice message will be repeated
when an alarm is called out.
Hang-Up:
Specifies the number of minutes of inactivity required after
answering a call before hanging up automatically if no CPC dis-
connect has already been received.
NOTE:
After any item has been changed, you MUST press the “Save Settings” but-
ton for your changes to be saved.
