il
@b
d
l
i
360 854 9559
f
866 783 1742
WebSwitch Installation and Operation Manual
SETUP
In the example, the eight different Broadcast Tools® devices are assigned IP
addresses of 192.168.1.51 to 192.168.1.58. The WebSwitchTM device with IP
address 192.168.1.55 is assigned port 8004. To access the WebSwitchTM from the
Internet, enter the IP address of the gateway plus the port number of the desired
WebSwitchTM unit. Example: 10.10.10.2:8004
6. Speed:
This specifies the communication speed of the network. Select 10Mbps for 10base-
T networks and 100Mbps for 100base-T networks. By default, this is set to 10Mbsp.
7. Mode:
This specifies the duplex mode for the network. By default, this is set to Half
Duplex.
2.3.3 Password Setup Page
The password setup page is used to change and enable passwords. A password is
required for the setup pages but is optional for the control page. The password is
enabled or disabled for the control page by using the Yes or No radio buttons.
Enabling the control page password also enables the requirement for a password
when reading/writing XML pages. Note that when the password is changed, the
password may be displayed in the browser’s history in clear text. It is advisable to
clear the browser history after setting the password.
