e-mail:
voice:
360.854.9559
fax:
866.783.1742
22
I/O Sentinel 4 G2 Installation and Operation Manual
SETUP
“Email/Network Setup” Web Page – Device Network Settings
Device Address:
Enter a static IP address here. Default: 192.168.1.55
Device Netmask:
Enter the Netmask here:
Default: 255.255.255.0
Gateway Address:
Enter the Gateway IP here: Default: 192.168.1.1
DNS Server IP Address:
Enter your DNS address here. Default: 8.8.8.8
HTTP Port:
Normally Port 80 Default: 80
“Email/Network Setup” Web Page – SMTP Settings
SMTP Server Address: SMTP (Simple Mail Transfer Protocol) server address.
Used to send emails.
SMTP Port:
Normally Port 25, 587 or 2525.
Default: 25
SMTP Return Address: Enter your return email address here. Emails from the I/O
Sentinel 4 G2 will indicate they are from this address. If
an email cannot be delivered, a message stating why will
be sent to this address.
SMTP Host ID:
No spaces or special characters allowed.
SMTP Authentication:
When checked, Base64 SMTP authentication used.
SSL/TLS secure authentication required by
Gmail/Outlook is not supported.
SMTP Username:
Enter SMTP server username here.
SMTP Password:
Enter SMTP server password here.
NOTE: Required for successful email: SMTP Server Address, SMTP Port,
SMTP Return Address, SMTP Host ID. If the SMTP server requires authenti-
cation: SMTP username and SMTP password must be supplied, and authenti-
cation turned on. A valid email address must be entered into Recipient Address
field #1.
WEBSITE:
Visit our web site for
product updates and
additional information.
