Broadcast Tools AES Switcher Sentinel 2+1 Installation And Operation Manual Download Page 3

e-mail: 

[email protected]   

voice: 

360.854.9559   

fax: 

866.783.1742

3

AES Switcher Sentinel

®

2+1 Installation and Operation Manual

INTRODUCTION

INTRODUCTION

Thank you for your purchase of a Broadcast Tools® AES Switcher Sentinel

2+1 Web-enabled two channel stereo silence monitor/audio switcher (referred to as
the AES Switcher Sentinel 2+1® throughout this manual).  We’re confident that this
product will give you many years of dependable service. This manual is intended to
give you all the information needed to install and operate the Broadcast Tools® AES
Switcher Sentinel 2+1®.

SAFETY INFORMATION

Only qualified technical personnel should install the AES Switcher Sentinel

2+1. Any attempt to install this device by a person who is not technically qualified
could result in a hazardous condition to the installer or other personnel or damage to
the AES Switcher Sentinel 2+1 or other equipment.  Please ensure that proper safe-
ty precautions have been taken before installing this device.  If you are unfamiliar
with this type of equipment, please contact a properly qualified engineer to handle
the installation and setup of the AES Switcher Sentinel 2+1.

Broadcast Tools® Products, as with any electronic device, can fail without

warning.  Do not use this product in applications where a life-threatening condition
could result due to failure.      

WHO TO CONTACT FOR HELP

If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment.  If you would like
more information about BROADCAST TOOLS® products, you may reach us at:

Broadcast Tools, Inc.

131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax:

866.783.1742

Internet Home Page: www.broadcasttools.com
E-mail:[email protected]

THANK YOU FOR CHOOSING 

BROADCAST TOOLS® BRAND PRODUCTS!

CAUTION!

Broadcast Tools®

Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.

NOTE:

This manual should be
read thoroughly before
installation and operation.

WEBSITE:

Visit our web site for
product updates and
additional information.

Broadcast Tools is a Veteran Owned Business

Designed, Assembled and Supported in WA State, USA

Summary of Contents for AES Switcher Sentinel 2+1











































Reviews: