e-mail:
voice:
360.854.9559
fax:
866.783.1742
17
AES Switcher Sentinel
®
2+1 Installation and Operation Manual
WEB SETUP
Left/Right Level Meters:
Display the left and right input audio levels for inputs
one, two and three, respectively.
In Phase/Below Threshold:
Indicates if the input audio is Above Threshold/In
Phase, Out of Phase, or Below Threshold.
Input Labels:
Input channel labels. Can be changed on the I/O Setup
page.
Sample Rate:
Indicates sample rate detected on input, or AES error.
AES Input:
AES switch position indicators. If the unit is in man-
ual mode, the user may switch between each input by
placing the cursor on the black button labelled “1” “2”
or “3” and clicking. The desired input is selected as
denoted by the LED being illuminated.
Monitor Input:
Monitor audio switch position indicators. If the unit is
Independent Monitor Audio Switching mode the user
may switch between inputs by placing the cursor
under each input LED, then click. The desired input is
selected as denoted by the LED being illuminated. If
the “Monitor Audio Switching Mode” setting is set to
“Follow AES” these controls are disabled.
AUTO:
When this mode is selected, any time input ONE fails,
the unit will switch to input TWO. Manual and remote
operation of the unit is disabled except for “SUS-
TAINED” operation. The LED is illuminated when
selected. Click on the black “AUTO” button to enable
auto mode.
MANUAL:
Manual mode allows the user to select either input one
or two as well as remote control operation. The man-
ual LED is illuminated when selected. Click on the
black “MANUAL” button to enable auto mode.
SWITCHER BOUNCE:
Allows the switcher to automatically restore from
Input 2 or 3 to Input 1 when audio returns while in
AUTO mode. Enabled by default.
EXT Indicator:
Illuminates when the “External” input is triggered.
WEBSITE:
Visit our web site for
product updates and
additional information.
