e-mail:
voice:
360.854.9559
fax:
866.783.1742
22
AES Switcher Sentinel
®
2+1 Installation and Operation Manual
WEB SETUP
“I/O Setup” Web Page (cont.)
K4, K5 and K6 Configuration: Each relay, labelled K4, K5, and K6, respectively,
may be programmed to operate when an input is
silent, active (switched to) or inactive (not
switched to). The logic for each relay is as follows:
When [input 1, input 2, or input 3] [Is Active, Inactive, Silent, or AES Error] delay
[X] seconds then [Engage] for [X] seconds.
NOTE: Delay timing = 0 (OFF) to 65535 seconds (18 hours, 12 min and 15 sec’s).
NOTE: To enable relay latch/sustained type operation, the [Engaged] delay
should be set to 0.
NOTE: Press the “Save Settings” button to save your changes.
WEBSITE:
Visit our web site for
product updates and
additional information.
