ACS5000 Installation Manual
Page 21
© 2017 Brivo Systems LLC. All rights reserved.
Rev 1
Figure 10.
Connect Expansion Boards in Expansion Chassis
3.
Daisy-chain the complete set of chassis together.
a)
For example, if there are six boards in the control panel, there would be a MAIN
BOARD and five expansion boards (E1, E2, E3, E4, and E5). Each expansion board
could be either a DOOR BOARD or an INPUT OUTPUT BOARD.
b)
To daisy-chain the boards together: (See Figure 11 below.)
•
Wire E5 to E4 in Expansion Chassis 2.
•
Wire E4 in Expansion Chassis 2 to E3 in Expansion Chassis 1.
•
Wire E3 to E2 in Expansion Chassis 1.
•
Wire E2 in Expansion Chassis 1 to E1 in the Control Chassis.
•
Wire E1 to the MAIN BOARD.
