4
HOW TO USE
THE SCEPTRE 120
4.1 BEFORE YOU START
When you unpack your new Sceptre you'll find a set of batteries have
been supplied but not fitted. So fit the batteries by following the instructions
given in section
9 .1.
Next, arrange for someone to call you so that you can test that your
Sceptre is working properly and so that you can adjust the volume of the
audible tone. You'll find the volume control on the underside of the Sceptre.
The Sceptre is also supplied with a page of information labels which you
can cut up with a pair of scissors and fit in the clear plastic window under
neath the handset. You'll find these labels useful for making a written note
of your most important telephone
numbers. To
fit
a
label, simply pull away
the plastic cover with your finger nail, write your numbers on one of the
labels, insert the label and replace the cover.
Also set the Sceptre's Clock to the correct time following the instructions
given in section
8.1.
4.2 MAKING MANUAL CALLS
To make a manual call, you use the Sceptre as you would an ordinary
push-button telephone. Press the keys firmly and make sure that each digit
appears on the display panel as you key it in.
If your switchboard system requires an access code and an access
pause, don't forget to include it in ALL the following procedures.
MAKING MANUAL CALLS
STEP
1
Lift the handset and listen for the dialling tone. The Clock dis
play will disappear.
STEP
2
Key in the number in the usual way. The Sceptre will display
the number, digit by digit.
STEP
3
When you've finished the call, replace the handset and the
Clock will be displayed again.
