//
11.0 PAIRING THE REMOTE CONTROL
Pairing the remote control
//
12.0 OPERATING THE APPLIANCE
Within 1 minute of turning the power on by the main
ON/OFF switch (located on the front, top right hand
side of the appliance), press and hold and the and
buttons on the remote control for 3 seconds, to
remotely pair to the appliance, the LCD only displays
bL (displayed at the display temperature position) and
flashes 5S, then returns to the current display state.
The remote is then paired to the appliance.
The ON/OFF switch is located on the front, top right hand side of the appliance.
Press the O/I button once to turn the fire on.
REMOTE CONTROL
The button distribution of the remote controller is as shown right, and
the current state information of the electric fireplace, such as the flame
effect, fuel bed, setting, temperature and time set, is displayed on the
LCD screen on the remote control.
1) Standby
Turns the appliance ON/OFF
standby, the default settings are:
heater set to 82°F/27°C, the
main flame effect is F1, the Fuel
bed is L1 (no temperature display).
2) Flame Control
Changes the flame effect brightness
F1, F2, F3, F4, F1 (cycle adjustment)
3) Heater
Heater button switches to the
temperature adjustment option
when the weekly timing function
is adjusted. Then use the and
buttons to select the desired
temperature. The temperature
cannot be adjusted while the daily
timer control is in use. Only the
heating function can be switched.
Temperature Setting range:
Centigrade: 17°C, 18°C, 19°C, 20°C,
21°C, 22°C, 23°C, 24°C, 25°C, 26°C,
27°C, ON, 17°C (Cycle)
Fahrenheit: 62°F, 63°F, 64°F, 65°F, 66°F,
67°F, 68°F, 69°F, 70°F, 71°F, 72°F, 73°F,
74°F, 75°F, 76°F, 77°F, 78°F, 79°F, 80°F,
81°F, 82°F, ON, 62°F (Cycle)
* Press and hold the heater button for
3 seconds can transfer from °C to °F.
//
17
