//
10.1 SLATE VIEW FUEL BED LAYOUT
Slate View
Evenly scatter the small crystals over the frosted
base as shown in image 1, left. The crystals should
be spread out across the whole base and form a layer
covering the whole area.
1
Take the two types of the slate effect pieces and
spread these evenly throughout, on top of the bed
of crystals.
Place the logs on top of the base layer created by the
crystals and slate pieces. Position them as shown in
image 3. The logs can be placed in any order, we have
used the larger ones as centre pieces and placed the
remaining logs around them.
IMPORTANT – Place the logs carefully on the fuel bed ensuring
you do not make contact with the rear or side glass. Coming into
contact with glass may cause damage.
2
3
//
15
