//
9.0 PREPARING THE APPLIANCE
For a two or three-sided installation
Crosshead screws
We strongly recommend that two people
are used to remove the glass, both using
protective gloves.
To remove the front glass from
the appliance, use a cross headed
screwdriver to remove the screws
from either end of the top bracket
of the appliance, holding the glass
in place.
Ensure the glass is supported at all times.
Next, gently leaver the top of the
glass towards you, ensuring you
have full support of the glass.
Lift the glass up and out from the
appliance and place the glass on a
soft, flat surface on the floor.
Insert your prefered fuel bed
options as shown in the following
pages in section 10.0 – 10.2.
To re-install the glass, see the
instructions in reverse order.
//
13
