ENGLISH
USER MANUAL
BRITEQ
®
12/18
BT-CHROMA800
STANDALONE MASTER/SLAVE WITH BUILT-IN PIXEL PROGRAM OR STATIC COLOR:
Use this function when you want an instant show on several, linked projectors.
By linking the units in master/slave connection, the first unit will control the other units to show a synchronized
automatic or sound activated light show.
•
Connect the projectors together, no DMX-controller connected to the master. You can put as many slaves
as you like on condition that the overall power consumption on the power line stays under 13A (+/-3000W
@ 230Vac).
•
Setup of the master:
exactly the same procedure as the “STANDALONE” setup.
•
Setup of the slaves:
all slaves should be set to
Working Mode = SLAVE Mode
, s
ee the section “setup
menu” for more information.
TWO OR MORE UNITS IN DMX-MODE:
Use this function when you want to control the projectors by any DMX controller.
•
First put the projectors in the desired DMX-mode: see the different DMX-charts and choose the one that
suits you best.
•
Give all projectors a start address: each projector shows its start + end address, make sure that the
addresses do not overlap!
CONNECT TO WIRELESS DMX
This projector is compatible with the
“Wireless Solution” G4 / G4S industry standard, working at 2.4GHz.
A.
First choose the desired DMX-channel mode + DMX-address
B.
The internal W-DMX receiver must be switched on
→ see setup menu, DMX Functions, W-DMX ON/OFF
C.
Before you can pair the projector with a new W-DMX transmitter, the current connection (if any) should be
removed (unlinked)
first → see setup menu, DMX functions, W-DMX Unlink
D.
On the external DMX-
transmitter: press the pair / link button → the projector should now pair automatically
to the W-DMX transmitter.
