Instructions for Installation & Use
- Series number: 2030/A/2010
Instructions for Installation & Use
- Series number: 2030/A/2010
38
39
Extension Strap distance to be measured.
Length 300mm (Use Safe-n-Sound part 0035 or equivalent).
Length 600mm (Use Safe-n-Sound part 0036 or equivalent).
Available from all major child restraint retailers.
DISTANCE TO MEASURE TO
THE ANCHOR POINT
The shaded areas of this diagram illustrate the possible locations of the anchor fitting. Within
each shaded area is an anchor fitting showing the correct way to install the fitting. Ensure
the anchor fitting is aligned as illustrated unless stated otherwise in the vehicle owner’s
handbook.
Adjustable upper
Anchorage strap.
FRONT OF VEHICLE
Consult the vehicle owner’s handbook for location of anchorage fittings or anchorage points
and the possible use of spacers. Some vehicles may have an anchor fitting fitted by the
vehicle manufacturer. If anchorage points cannot be found refer to car manufacturer or local
child restraint fitting station or traffic authority for optimum position of anchorage point and
the use of spacers.
UPPER ANCHORAGE STRAP
IMPORTANT:
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS THE RISK OF
INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE ANCHOR FITTING. ALWAYS
ENSURE THAT THE ATTACHMENT CLIP IS CORRECTLY ENGAGED TO THE ANCHOR
FITTING AND NOT HOOKED OR FITTED TO ANY OTHER OBJECT BEFORE EACH USE
OF THE RESTRAINT. THIS IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS STATION
WAGONS, VANS, HATCH BACKS OR VEHICLES WITHOUT A FIXED PARCEL SHELF, SINCE
THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT INSTALLATION NOTE:
In some vehicles the anchor fitting in the rear vertical panel can only be installed in one
way. Please refer to vehicle owner’s handbook or a child restraint fitting station for correct
method.
INSTALLATION OF CAR ANCHOR FITTING
INSTALLATION OF CAR ANCHOR FITTING
45
°
Anchorage Clip Cover
