Instructions for Installation & Use
- Series number: 2030/A/2010
Instructions for Installation & Use
- Series number: 2030/A/2010
HOW TO USE
30
31
HOW TO USE
REMOVING BABY & CARRIER
FROM BASE
A.
Loosen the upper anchorage strap and
disengage the Upper Anchorage Strap bracket
from the upper anchorage strap attachment clip.
Ensure that the bracket does not fall on the baby.
B.
Fold handles up and grasp with one hand
pressing the catch marked "PRESS" with the
other hand.
C.
With the catch depressed raise the Carrier and
slide it towards the catch end of the Base.
D.
When the Carrier bosses clear the Base hooks,
raise the Carrier further and remove from
vehicle.
REMOVAL OF BABY FROM
CARRIER
A.
Press Harness Adjuster Strap Lock while pulling
Harness Buckle to slacken the harness.
B.
Press red button on Harness Buckle then both
Harness Tongues will be released.
C.
Feed baby's arms through each side of the
harness and slide the two Harness Tongues
under the elastic side bands. Place buckle
between baby's legs and remove baby.
If removing baby from Carrier while still in the
car, first disengage Upper Anchorage Strap from
the Upper Anchorage Strap ensuring the Upper
Anchorage Strap Bracket does not fall on the baby.
Press red button
to release child
Upper Anchorage
Strap Attachment Clip.
Upper Anchorage
Strap Bracket.
REGULAR CARE OF THIS RESTRAINT:
Please check the following items regularly to ensure the safety of your child:
A.
Check the webbing for fraying.
B. Ensure the inside of the buckle is free of foreign matter, food or feeding liquids. Check
that the buckle clicks and is not sluggish or sticky in operation. If sluggish, wash the
buckle as shown on page 35.
C. Check the Carrier engages firmly in to the Base.
D.
Ensure there are no cracks in moulding or the plastic moulding.
E.
Check the harness adjuster is operating and is clamping the webbing.
F.
If any part of the Infant Carrier is cracked or broken, seek repair immediately or replace
the Infant Carrier.
G.
Check that the Infant Carrier catch retains the Infant Carrier to the Base. Check screws
and rivets are firmly in place. If not seek repair.
CLEANING THE RESTRAINT AND HARNESS STRAPS
Use only mild soap and water with a damp cloth to clean all straps, metal and plastic parts
of the restraint. Do not use chemicals or cleaning agents.
