24
Turn on the mains water supply and
open the isolating valves using a suitable
flatblade screwdriver.
5. Attach the showerhead holder
Position the showerhead holder bracket
on the wall, bearing in mind the different
heights of people likely to use the
shower and the length of the hose when
connected to the mixer. Use the holder
bracket to mark the fixing hole positions
onto the wall.
Warning:
Please check for any
hidden pipes and cables before drilling
holes in the wall.
Drill the wall at the marked positions to
suit the wall fixings to be used, fix the
showerhead holder bracket to the wall
and push-fit the showerhead holder.
6. Connect the shower hose to mixer
Screw the shower hose (ribbed nut end)
onto the mixer ensuring that the washer
is fitted.
Bath Shower Mixer - Installation
7. Connect the shower hose to showerhead
Screw the shower hose (conical end) onto
the showerhead ensuring that the rubber
washer is fitted.
Place the showerhead into the holder.
Showerhead
holder
Showerhead
holder bracket
Washer