28
Maintenance
General Cleaning
Before attempting to clean your shower unit you must switch off
the power at the isolating switch. Do not remove the cover.
Do not use abrasive cleaners or solvents to clean this unit. The
shower unit and accessories should be cleaned with a soft, clean,
damp cloth.
Cleaning the Showerhead
Your showerhead has a rub-clean pad for easy cleaning. Simply rub
your fingers across the rubber spray jets regularly and before you
turn the shower on to remove any scale or debris.
The hardness of the water in your area will determine how often
you should clean your showerhead. Build up of scale in particularly
hard water areas combined with constant use means you may
need to clean your showerhead once a week. To ensure continued
performance of your electric shower the showerhead needs to be
regularly descaled.
Cleaning the Filter
Periodically remove the inlet filter and rinse under clean running
water. First isolate the electrical and water supply to the unit.
To remove:
Turn anti-clockwise using a large flatblade screwdriver.
Note:
A small amount of water will be discharged when the filter is
removed - this is normal.
To clean:
Wash under clean running water. Refit the filter and gently
tighten.
Filter
Cleaning the Outlet Hose
Mesh Filter
Periodically remove the outlet hose from the
shower and clean by rinsing the mesh filter under
cold running water. Refit the mesh filter and re-
connect the outlet hose.
Need help?
Give us a call on
0844 701 6273
and speak to one of our trained advisors.