BriskHeat
®
Corporation. All rights reserved
7
TB4000 Bulb and Capillary
Temperature Controller
TROUBLESHOOTING GUIDE
Please read this guide prior to contacting BriskHeat
®
. This guide is designed
to answer the most commonly asked questions. If you are unable to identify
the problem or need additional assistance, please contact your local distributor
or BriskHeat at
1-800-848-7673 (U.S. & Canada)
, 1-
614-294-3376 (World
wide)
, or
.
PROBLEM
SOLUTION(S)
Heater does not warm up Check set-point
Verify heater is connected to proper voltage
Check power source: Using a voltmeter, test the power
source and assure correct voltage is present
Check to see if there is a resistance reading (not an open
circuit) in heater using an ohm meter
Heater does not turn off
Check set-point
Ensure correct bulb placement
Check bulb and capillary for any holes or kinks
Heater will not reach
desired temperature
Check set-point
Ensure correct bulb placement
Power source circuit
breaker trips
Validate that the circuit breaker is capable of handling the
amperage requirement of heater(s)
Examine system for any damage
Warranty Information
BriskHeat
®
warrants to the original purchaser for the period of eighteen (18)
months from date of shipment or twelve (12) months from date of installation,
whichever comes first. Contact factory at 1-800-848-7673 (U.S. & Canada) or
1-614-294-3376 (World wide) for complete details.
