BriskHeat
®
Corporation. All rights reserved
3
TB4000 Bulb and Capillary
Temperature Controller
Inspect all components before use.
Do not repair damaged or faulty
controller
Do not crush or apply severe physical
stress on any component of system,
including cord assembly.
Do not use controller and heater if any
component is damaged.
Failure to observe these warnings may result in
personal injury or damage to the heater.
IMPORTANT SAFETY INSTRUCTIONS
Do not immerse or spray any component
of the control system with liquid.
Keep volatile or combustible material away
from controller when in use.
Keep sharp metal objects away from
heater.
Use controller only ordinary (non-
hazardous) locations
Failure to observe these warnings may result in
electric shock, risk of fire, and personal injury.
End User Must Comply to the Following:
Only qualified personnel are allowed to
connect electrical wiring.
All electrical wiring must follow local
electrical codes and highly recommend
following NEC Article 427.
Final installation / wiring is to be inspected
by the authority who has jurisdiction in the
area that the heater and temperature
controller is installed.
The end-user is responsible for providing
a suitable disconnecting device.
The end-user is responsible for providing
suitable electrical protection device. It is
highly recommended that a ground fault
circuit breaker is used.
Failure to observe these warnings may result in
personal injury or damage to the heater.
A person who has not read and understood all
operating instructions is not qualified to operate
this product.
