© BriskHeat
®
Corporation. All rights reserved.
13
ACR
®
3 MiniPRO™ Hot Bonder
Cancel a Program:
This function cancels a program prior to its completion.
1. Touch END CURE button in the OPERATING menu to cancel running
program.
View Plot:
This function views a graphical plot of current activity. The graphical plot shows
actual temperature, target temperature, high and low alarms. To switch between
normal and zoomed view, touch the ZOOM button.
1. Touch
button in the OPERATING menu to view plot.
Explanation of Lines
Black - Actual Plot
Dotted Green - Target Plot
Blue - Time Corrected Target Plot. Time is corrected when either:
1. Hot bonder is unable to achieve ramp up or down at targeted rate OR
2 . User places program on hold.
Purple - High / Low Deviation Alarm Limit
Red - High / Low Shut Down Alarm Limit
2. Touch
at top of screen to return to zone operating
screen.
© BriskHeat
®
Corporation. All rights reserved.
14
ACR
®
3 MiniPRO™ Hot Bonder
Alarms:
If all conditions are inside the programmed limits while a zone is running, the
zone tab is green. If while running, any condition exceeds programmed limits,
the zone tab turns red.
If a variable exceeds a programmed limit, the display field of the variable turns
red and a flashing red alarm box appears in the zone screen. Touching the red
alarm box silences the audible alarm. The red alarm box and the red variable
field remains red until the alarm condition is corrected.
PROGRAM MENU
From this menu, you can write a new program, add or remove a program’s
password protection, view a program’s profile, or delete a program.
Touch
button at top of screen to access the PROGRAM
menu.
Programs can be written or changed at any time even when the program is
running. Changes to an active program do not take place until the active zone
is restarted. For additional information see
Edit an Existing Program While
Running
on page 20
.
See page 19 for instructions to edit existing program parameters.
