background image

© BriskHeat

®

 Corporation.  All rights reserved.

 

 

27 

ACR

®

3 MiniPRO™ Hot Bonder 

Notes:  

© BriskHeat

®

 Corporation.  All rights reserved.

 

 

28 

ACR

®

3 MiniPRO™ Hot Bonder 

PN: 41039-05 Rev D 

WARRANTY INFORMATION 

BriskHeat warrants to the original purchaser of this product for the period of 
eighteen (18) months from date of shipment or twelve (12) months from date of 
installation, whichever comes first.  BriskHeat’s obligation and the exclusive 
remedy under this warranty shall be limited to the repair or replacement, at 
BriskHeat’s option, of any parts of the product which may prove defective under 
prescribed use and service following BriskHeat’s examination, is determined by 
BriskHeat to be defective. The complete details of the warranty can be found 
online at www.briskheat.com or by contacting us at 1-800-848-7673 (toll free, 
U.S. / Canada) or 1-614-294-3376 (Worldwide).   

Corporate Headquarters: 

4800 Hilton Corporate Dr. 

Columbus, OH 43232, U.S.A. 

Toll Free: 800-848-7673 

Phone: 614-294-3376 

Fax: 614-294-3807 

Email: [email protected] 

Europe: 

P.O. Box 420124 

44275 Dortmund, Germany 

Summary of Contents for ACR 3 MiniPRO Hot Bonder















Reviews: