Brintal Ypush
Owner’s Manual and Service Record
32
User Trouble-shooting
Owner/User quick guide
This is a very basic guide to initial fault finding, and the
fault may be simple to fix. If you have any doubts or
concerns don’t use the Ypush and immediately contact
your Dealer.
Help and Advice
see
www.ypush.com
which will be
regularly updated as time goes by with general informa-
tion, user tips, and handy hints to help you get the most
out of the Ypush.
Your Dealer is there to help you so please give them as
much information as possible. This will hopefully get the
problem fixed quickly. Contact your Dealer and explain
exactly what the problem is, recounting as much detail as
possible including the indicated faults.
Symptom
When the key is switched on there are no
lights on the dashboard.
Ignition on, red and green dash lights on, but
throttle does not operate Power-assist.
Brake lever fully pressed down but when
wheels rotate they are noisy and/or bind.
Brake lever is locked in the ‘’UP’’ position with
the brakes jammed on and I can’t push it down
or release the brakes.
Ypush behaves strangely or erratically when
driven.
Solution
Battery flat or not connected – check
Check circuit breaker – Page 13
Ypush in "Sleep mode" see Page 12
Occupant sensor activated – Page 16 - red
light must be
off
to operate Power-assist,
place a 10kg + weight on the seat and retest. If
problem persist contact your Dealer.
A small amount of rubbing is normal, but if it is
excessive, then adjustment to the brake calipers
may be necessary – contact your Dealer.
DO NOT
try to force the brake lever back
down, this
will
cause damage. Excessive
wear in mechanism or cable has occurred and
requires adjustment of the brake cable – see
page 14, or contact your Dealer.
Possible electronic issue – contact your Dealer.
