Brintal Ypush
Owner’s Manual and Service Record
16
Mechanical Anti-tip System:
The Ypush features a pair of mechanical
Anti-tip wheels, fitted and stored at the rear of the wheelchair.
Note:
Before packing the Ypush into the Travel Roller Bag, the Anti-tip
wheels must be removed, swivelled around, and securely reconnected
to the front end of the same mounting tube in the "storage" position.
Follow these steps to install, use and store.
1
Removal from storage position:
Remove the Anti-tip wheels from
the "storage" position at the front of the mounting tube
20
by
pressing the spring button as shown by the green arrow, and pulling
the chrome tube out as shown by the black arrow.
Note:
Wheels face
upwards in storage.
2
Installation for use:
Take the assembly to the rear of the Ypush,
rotate it, and press the spring button as shown by the green arrow,
slide the wheel assembly inside the rear of the mounting tube.
Note:
Wheels face downwards for use.
21
3
Make sure that the spring button reappears through the hole to
confirm that the wheels are locked securely in place.
22
4
Stowing the anti-tip wheels:
Simply reverse the above procedure.
Make sure that the spring button reappears in the "storage"
position to prevent the anti-tip wheels from getting lost during transit.
Occupant Sensor:
The Ypush requires an occupant on board, or a
weight of at least 10kg placed on the seat base to enable the Power-
assist to function. This is a safety device to reduce the risk of
unintended operation or misuse. If there is no weight in the seat the red
LED light will remain illuminated and Power-assist is not available.
Controls and features
Mechanical Anti-tip/Occupant sensor
Warning!
Always fit correctly before an occupant boards the
Ypush. They should remain in place at all times while being used, as
they are a safety device to reduce the risk of injury from tipping over
backwards if excessive gradients are attempted.
20
21
22
