Step 17
Remove front bolt from the right
side of the grill assembly control
panel as shown. Place the four
key holes on the side burner
assembly over the four pre-
attached bolts on the right side
of the cart frame assembly, and
slide toward the front of the grill
to lock. Tighten bolts securely,
and reinsert bolt to fasten the
front panel.
Step 18
Remove two M4 bolts from the
side burner valve. Insert the side
burner valve assembly through
the hole in the side burner table
base, then fi rmly seat the valve
nozzle into the burner venturi.
Hold in place while you perform
Step 19
.
Step 19
Place the bezel over the control
knob mounting stem and position
over holes in side burner base
and side burner valve assembly.
Attach with two M4 x 10 mm bolts
which come with valve. Then
install the side burner control
knob onto valve stem.
Note:
Align bezel with stop pin
hole toward bottom as
shown.
27
Bezel
Stop Pin
Hole
Side Burner
Control Knob
Side Burner
Valve
Burner Venturi
Valve
Nozzle
Summary of Contents for 810-8503-SB
Page 31: ...Brinkmann 8503 Assembled 30 ...
Page 62: ...Brinkmann 8503 Armada 61 ...
