Brinkmann 810-8503-SB, Owner'S Manual, Page: 25 / 63

Step 7
Insert the three pre-attached screws
on the sear burner front panel into
the key holes on the sear burner
assembly. Tighten the screws with
screwdriver.
Step 8
Remove the three pre-attached
screws from the side burner wind
shield. Attach the wind shield to the
bottom of the side burner assembly
by inserting the screws through the
top of the open side burner. Tighten
the screws with screwdriver.
Step 9
Insert the three pre-attached screws
on the side burner front panel into
the key holes on the side burner
assembly. Tighten the screws with
screwdriver.
Wind Shield
24