4.2.5 Change factory program setting
The Air Control - Allure clock thermostat has 6 preset programs; 3 heating programs (P1, P2 and P3) and 3
cooling programs (P1, P2 and P3). See appendix for settings
®
Appendix: Standard settings weekly programs
page 30
.
Perform the following actions to change a programma P1, P2 or P3:
▪
Press return key "
2
" as many times as necessary to get to the main
screen
▪
Press setting knob "
1
"; ‘Main Menu’ opens
▪
Select ‘Basic Settings’ by turning setting knob "
1
"
▪
Press setting knob "
1
"; ‘Basic Settings’ opens
▪
Select ‘clock program' or 'clock program cooling’ by turning setting
knob "
1
"
▪
Press setting knob "
1
"; selected program opens
▪
Select program you wanted to adjust by turning and pressing setting
knob "
1
"
▪
Select period you wanted to adjust by turning and pressing setting
knob "
1
"
▪
Select "Start time" and/or "Temp. selection"depending which setting
you wanted to adjust by turning and pressing setting knob "
1
". Press
return key "
2
" to get back to the previous screen after pressing knob 1
to save change
▪
Change, if desired, other settings in the same way
▪
Press return key "
2
" as many times as necessary to get to the main
screen
Air Control - Allure clock thermostat 616720-A
Brink / 15
