11.2 Connecting position switch
If the application of a 4-position switch is chosen:
1. Loosen the two screws between the protective cover and the filter door.
2. Slide the protective cover to the side and remove it from the appliance.
3. Connect the position switch to the modular connector of the appliance, see Connecting external connectors
Connecting external connectors Air Comfort
11.2.1 Position switch with filter indication
A position switch with filter indication works mechanically. The red indication LED lights up if the filter of the
appliance has to be cleaned or replaced, and flashes if there is a fault.
When connecting the position switch with filter indication, a 6
‑
core modular cable is used. For this cable, the tab of both
modular connectors should be mounted onto the marking on the cable.
A. Air Comfort appliance
B. 4
‑
position switch with filter indication
C. Modular cable, 6
‑
core
11.2.2 Wireless position switch
A wireless position switch works with the help of Radio Frequency (RF) technology and makes a wireless
connection with the Air Comfort. A wireless position switch can be easily added to existing systems.
A. Air Comfort appliance
B. Wireless remote control receiver
C. Transmitter with 4 positions
D. Transmitter with 2 positions
E. Optional extra transmitters that can be connected (Max. 6)
Air Comfort 614788-B
Brink / 41
