9 Maintenance
9.1 Cleaning filter
Clean the filter if:
▪
The notification text
FILTER
is shown on the display.
▪
If applicable, the red indication LED by the position switch lights up with filter indication.
Never use the appliance without filter.
The filter must be replaced each year.
Use the
(op pagina 31) to reset the filter notification. The control of the appliance begins again to
count down until the next cleaning is necessary. A filter reset can be carried out at any time.
If the filter is not cleaned or replaced on time, the operation of the appliance is impaired.
Clean or replace the filter:
1. Disconnect power from appliance (zie
op pagina 32).
2. Open the filter door.
3. Remove the filter.
4. Clean the filter with a vacuum cleaner.
q
w
5. Put the filter back into the appliance.
6. Close the filter door.
7. Press
[R]
on the control panel for 5 seconds to remove the filter indication.
The notification message
FILTER
flashes briefly.
The
FILTER
notification of the display disappears, and, if applicable, the indication LED by the position switch
goes out. The appliance is in operating mode.
Air Comfort 614788-B
Brink / 37
