6K689
Page 42
OPTIONS
OPTIONS
OPTIONS
OPTIONS
OPTIONS
OPTIONAL EQUIPMENT
Wear Strip
(Optional Flat Style) - 6K587
The wear strip is intended to protect the shank
form excessive wear in abrasive soil condi-
tions. This kit includes wear strip and hard-
ware to mount it below the rear bracket of the
shank. One kit required per shank. Refer to
page 12 of the Repair Parts Catalog for more
shank wearstrip and point options.
Set Back Extension Kit
(Optional) - 3K814
This set back extension is used to move the
shank back approximately 15". Two of these
kits would be recommended, for example,
for a ZS5301 to offset the shanks
as shown in Figure 13. One kit
is required per shank.
SET BACK BRACKET
U-BOLT, 3/4”
LOCK WASHER, 3/4”
NUT, 3/4-10NC
FRONT CLAMP
SHANK ASSEMBLY
Point Options:
V-Cast Steel Point, 2”
Flat Alloy Point, 2 1/2”
Flat Point, 2 1/2”
Winged Alloy Point, 7”
1200
rev11-27-02
Page 34
