6K689
Page 14
AS
AS
AS
AS
ASSEMBL
SEMBL
SEMBL
SEMBL
SEMBLY
Y
Y
Y
Y
ASSEMBLY INSTRUCTIONS
Additional parts identification and location can
be obtained from reviewing parts catalog.
To assemble machine, select a smooth level
area that can be reached by a hoist or lift truck.
NOTE:
5-shank frame unit is shown in
figures. The smaller and larger frame units
are similar but reference to figures may not
always be an exact representation.
STAND
STAND
MOUNT
CLEVIS PIN, 3/4” x 4”
HAIRPIN COTTER
U-BOLT, 3/4”
COTTER PIN,
3/16” x 3”
NUT, 3/4-10NC
LOCK WASHER, 3/4”
FRAME
Figure 6
Basic Machine
1.
Place frame on supports (approx. 38"
high). Be sure supports will hold 1500#
each.
DO NOT WORK UNDER
MACHINE UNLESS IT IS
BLOCKED UP SECURELY.
2.
Mount the stand mount to the front of
frame with 3/4" U-bolts, lock washers,
and nuts. See Figure 6. Install the stand
into the stand mount and fasten with 3/4”
dia. x 4” clevis pin and hairpin cotter.
NOTE: Supports not shown. Stands
may not be shown in following
figures in order to make other
parts more identifiable.
1200
rev601
Note: Mount as far toward the
outsides of the machine
as possible.
Page 12
