Brillion Land Commander III LCS11153-4, Operator'S Manual, Page: 73 / 76

1P423 Page 67 Rev1106
TROUBLESHOOTING
POSSIBLE CAUSE SUGGESTED REMEDY
Plugging around the shanks
Incorrect shank location.
5HIHUWR0DFKLQH&RQ¿JXUDWLRQ6HFWLRQIRUFRUUHFW
shank placement for your particule model.
Plugging at wheel.
5HIHUWR0DFKLQH&RQ¿JXUDWLRQ6HFWLRQWRFKHFN
shank location. Move shank away from wheel a
short distance from recommended location. Make
sure that tandems are arranged as shown for
shank spacing.
Too much trash. Operate at an angle to the rows if possible.
Plugging in the gangs
Gangs set too deep.
Raise gangs a small amount. Allow soil to dry
if possible.
Machine does not raise or lower properly
Hoses not connected properly.
Refer to hydraulic schematics in the assembly
section to check hose setup.
Cylinder leakage,external or internal. Repair or replace the cylinder.
Hydraulic hose ends not working properly. Replace hydraulic hose.