Brillion Land Commander III LCS11153-4, Operator'S Manual, Page: 36 / 76

1P423 Rev0410 Page 32
FRONT LH
GANG FRAME
FRONT RH
GANG FRAME
NUT,HEX 1-8
WASHER,LOCK 1"
HHCS,1-8 x 9-1/2
NUT,HEX 1-8
WASHER,LOCK 1"
HHCS,1-8 x 9-1/2
SMALL FRAME
MID-SIZE FRAME
AFTER FRONT GANG
FRAMES 1-8 x 9-1/2 HHCS
ARE SECURED IN PLACE,
TIGHTEN PIVOT PLATE
3/4-10 x 2-1/2 HHCS.
LCS3_AsmFrontGangFrame
FRONT GANG FRAME ASSEMBLY
ASSEMBLE FRONT GANGS FIRST TO PREVENT REARWARD WEIGHT SHIFT.
DO NOT WORK ON OR UNDER MACHINE UNLESS IT IS BLOCKED UP SECURELY!
Attach Left Hand and Right Hand Front Gang Frames to frame with 1-8 x 9-1/2 HHCS, 1" Lock
Washer and 1-8 Hex Nut.
Mid-Size Frame Note : When assembling mid-size frames you will need to tighten pivot plates
3/4-10 x 2-1/2 HHCS after the installation of 1-8 x 9-1/2 HHCS. See below.
Note: Gang Frames shown in 15° position.
FRONT
Assembly - Front Gang
Assem
bly