7K116
Kit #7K250 .................................................. 2.5#
Function:
1.
Measures the amount of ground
planted
Acre Meter
Kit
Installation:
The acre meter, consisting of three main parts;
the acre meter, the pick-up, and the
magnet wheel, is mounted on the left front side of
the seedbox.
1.
Drill 13/32” holes into seedbox at location
shown in Figure 27A.
Next, use 3/8-16 NC x 1” capscrews,
lockwashers, and nuts to attach the
bracket which holds the acre meter, as
shown, onto the left front of the seedbox
Figure 27A
MACHINE SCREW,
#10-24 x 1”
NUT, 3/8”
ACRE METER
ASSEMBLY
DRILL 13/32”
HOLES
CAPSCREW,
3/8-16NC x 1”
LOCKWASHER, 3/8”
#10
LOCKWASHER
NUT, #10-24
PICK-UP BOX
CABLE
ACRE METER
CABLE
MOUNTING
BASE
2.
Mount the acre meter onto this
bracket with #10-24 x 1” machine
screws, lockwashers and nuts.
Then run the wire from the bottom
of the meter down the side of the
seed box and along its left side
Use mounting bases to hold the
wire in place. Direct it across the
plate which attaches seedbox to
endplate -see Figure 27A. Here,
(in step #5), it will plug into its
mating cable from the pick-up
FRONT OF
SEEDER
Page 36
900rev601
