Maintenance
Cage Unloading System
46
27. Turn the main power source “ON”.
28. Turn the master switch to the “ON” position.
29. Push and release the safety shutdown reset button.
30. Slowly pull the fourth hydraulic lever (LIFT TRANSFER CHAIN) toward you and observe closely if the chains
are moving smoothly.
31. If the chains are moving smoothly, go to step 36.
32. If the chains are not moving smoothly, the chains must be tightened properly.
33. Turn the master switch to the “OFF” position.
34. Turn the main power source “OFF” and lockout/tagout.
35. Go back to step 26.
36. Turn the master switch to the “OFF” position.
37. Turn the main power source “OFF” and lockout/tagout.
MAINTENANCE, UNLOADING SYSTEM (CONT’D)
ALWAYS ADHERE TO THE PROPER LOCKOUT/TAGOUT PROCEDURES.
DANGER
MAKE SURE YOU ADHERE TO THE PROPER LOCKOUT / TAGOUT
PROCEDURES BEFORE ATTEMPTING ANY MAINTENANCE WORK.
DANGER
RECEIVING AND HANGING BELTS
38. With the main power source “OFF” and proper lockout/tagout, inspect the condition of the belts and repair
if necessary. This should be performed weekly.
39. Verify the tension of the drive chains and adjust if necessary. This should be performed weekly.